Rules & Regulations
Pin Spots & Stick Lights
Pin spots that overhang the edge of a stand to illuminate fascias or façades of structures are permitted only where all the following conditions are met:
- Pin spots must not be installed below a height of 2.5m, measured from the hall floor.
- At a height of 2.5m or above, stick lights up to 300mm in length are permitted.
- Stick lights up to 500mm in length are permitted only on stands that are 6m high.
- No other forms of lighting may overhang the gangways.
- All lighting must be shown on the stand drawings.
- Any stick lights installed onsite without prior approval must be removed.
See also
Stand Plan Submission as all lighting must be shown on the stand drawings and stick lights require prior approval.
