Rules & Regulations
Outdoor Structures
Exhibitors are responsible for ensuring that all outdoor stand structures, materials and construction methods are suitable for outdoor use and can safely withstand the expected weather conditions throughout build-up, Event open days and dismantling.
Outdoor structures must comply with the complex-structure requirements set out in Stand Plan Submission, including structural approval, the Certificate of Stability and wind-stability calculations.
Outdoor stands must meet the following requirements:
- Structural stability: Structures must be self-supporting and properly ballasted. Loose items, signage and furniture must be secured against displacement by wind.
- Waterproofing: Roofs, walls, joints, doors and windows must be watertight during rainfall.
- Drainage: Rainwater must drain without pooling on roofs or floors and must not discharge onto walkways, neighbouring stands or Venue areas.
- Electrical protection: Electrical installations must be suitable for outdoor use. Cabling, connections and distribution boards must be protected from water and kept off the ground. Installation, testing and isolation must comply with Electrical Safety & Equipment.
- Internal conditions: Structures must be designed and built to remain fit for outdoor use and to keep conditions inside safe and usable for staff and visitors, including during cold or wet weather.
- Flooring: Floor surfaces must be non-slip and remain safe in wet conditions.
- Materials and finishes: Graphics, finishes and furnishings must be weather-resistant and securely fixed.
The Organisers and the Venue may inspect outdoor stands at any time. Where a stand is considered unsafe or unsuitable for outdoor conditions, they may require remedial work or restrict its use. Exhibitors are responsible for any damage, loss or costs caused by their stand failing in adverse weather.
